See post for details
Re-upping stock of reagents for use in qPCR
- Made 3 more 50ul aliquots of 10µm Probe (enough for 9 plates running n=72 wells)
- Made 3 more 50ul aliqouts of 10µm F Primer (enough for 9 plates running n=72 wells)
- Made 3 more 50ul aliquots of 10µm R primer (enough for 9 plates running n=72 wells)
Serial Dilution of VpT4 Standard Curve
Some confusion. I tossed the empty tubes from my qPCR run for the standard curve because I used it all up. I would have tossed n=7 tubes because the curve is run in A1-3 –> G1-3 in triplicate.
It’s supposed to be 3.0+06, 3.0+05, 3.0+04, 3.0+03, 3.0+02, 3.0+01, and 3.0+00
but… the only tubes I have remaining in the box from the original dilution are 3.0+09 and 3.0+08… so that likely means that in all my qPCR runs, I was using standard curve starting at 3.0+07 and ending at 3.0+01. I should have 3.0+09, 3.0+08, and 3.0+07 in the box… I think.
So… I’m not totally sure how to confirm that. I’ve been looking through notes and don’t have any specifics on that and don’t have any pictures of the dilutions either. Maybe it can be sorted on the qPCR data output itself?
Regardles, I diluted more of the standard curve, but instead of starting from fresh, I’m rediluting from the 3^8 from a few months ago.
I made the yeasttRNA + 1x Buffer TE (10ul of yeast tRNA + 990ul 1x Buffer TE) which is the diluent.
I vortexed and centrifuged the diluted stock at 3.0+08 and made the dilutions for 3.0+07 all the way down to 3.0+00 (10ul of the previous dilution + 90ul of the ytRNA+BufferTE diluent).
The tubes are in FTR 209 fridge.
Current qPCR status
- Need to finish eelgrass swab DNA runs (n=3 samples remain + 3 DNA extraction blanks (total n=6))
- Need to do all mussel shell swab DNA (n=39 samples + n=5 blanks (total n=44))
- Need to extract DNA from n=32 mussels and then run all on qPCR (n=32 samples + n=4 blanks (total n=36))
Need to do two batches of DNA extractions of mussel DNA (each batch –> n=16 samples + n=2 DNA extraction blanks).
The total number of plates needed to be run is:
All sample total (including DNA extraction blnaks) = 86
Number of samples run per plate = 16
Total number of plates to run = 5-6 plates
I have enough F and R primer aliquots and Probe aliqouts for 9 plates.
i have enough diluted standard curve for (90ul/6ul = 15) 15 plates.
I’m not sure about the other reagents…
Mussel DNA extraction notes
I want to make sure I’m subsetting a mixture of the whole body. I already have shucked the mussels and their body tissues are in the -80C in tubes.
I wasn’t able to really homogenize the tissue… so I’m going to use the Bullet Blender.
GitHub Issue: #2507
I need to figure out some things:
- How much of the glass beads to put in the 5mL eppendorf tubes for homogenization
- How much and of WHAT to put in for a homogenization buffer… I’m not sure exactly what that means. Is that something that will be in the extraction kit? I’m using the Qiagen DNEasy Blood and Tissue Kit.
Once that’s figured out, I’ll homogenize the mussel body tissues, then subset 20mg of the sludge for DNA extraction and freeze the remainder in the -80C.